Prerequisites: Knowledge of SolidWorks and basic mechanical engineering concepts is recommended
Description: This course is designed to make SolidWorks users productive more quickly with the SolidWorks Simulation Bundle. This course will provide an in-depth coverage on the basics of Finite Element Analysis (FEA), covering the entire analysis process from meshing to evaluation of results for parts and assemblies. The class discusses linear stress analysis, gap/contact analysis, and best practices.
The topics covered in this course are:
|
Introduction
|
About This Course
What is SolidWorks Simulation?
What Is Finite Element Analysis?
Build Mathematical Model
Build Finite Element Model
Solve Finite Element Model
Analyze Result
Errors in FEA
Finite Elements
Degrees of Freedom
Calculations in FEA
Interpretation of FEA Results
Units of Measurement
Limitations of SolidWorks Simulation
|
|
Lesson 1: The Analysis Process
|
Objectives
The Analysis Process
Case Study: Stress in a Plate
Project Description
SolidWorks Simulation Options
Preprocessing
Meshing
Postprocessing
Multiple Studies
Reports
|
|
Lesson 2: Mesh Controls, Stress Concentrations and Boundary Conditions
|
Objectives
Mesh Control
Case Study: The L Bracket
Project Description
Case Study: Analysis of Bracket with a Fillet
Case Study: Analysis of a Welded Bracket
Understanding the Effect of Boundary Conditions
|
|
Lesson 3: Assembly Analysis with Contacts
|
Objectives
Contact Analysis
Case Study: Pliers with Global Contact
Pliers with Local Contact
|
|
Lesson 4: Symmetrical and Free Self-Equilibrated Assemblies
|
Objectives
Shrink Fit Parts
Case Study: Shrink Fit
Project Description
Analysis with Soft Springs
|
|
Lesson 5: Assembly Analysis with Connectors
|
Objectives
Connecting Components
Connectors
Case Study: Vise Grip Pliers
|
|
Lesson 6: Compatible/Incompatible Meshes
|
Objectives
Compatible / Incompatible Meshing
Case Study: Rotor
|
|
Lesson 7: Assembly Analysis Mesh Refinement
|
Objectives
Mesh Control in an Assembly
Case Study: Cardan Joint
Problem Statement
Part 1: Draft Quality Coarse Mesh Analysis
Part 2: High Quality Mesh Analysis
|
|
Lesson 8: Analysis of Thin Components
|
Objectives
Thin Components
Case Study: Pulley
Part 1: Mesh with Solid Elements
Part 2: Refined Solid Mesh
Solid vs. Shell
Creating Shell Elements
Part 3: Shell Elements - Mid-plane Surface
Results Comparison
Case Study: Joist Hanger
|
|
Lesson 9: Mixed Meshing Shells & Solids
|
Objectives
Mixed Meshing Solids and Shells
Case Study: Pressure Vessel
|
|
Lesson 10: Mixed Meshing Solids, Beams & Shells
|
Objectives
Mixed Meshing
Case Study: Particle Separator
|
|
Lesson 11: Design Scenarios
|
Objectives
Design Study
Case Study: Suspension Design
Part 1: Multiple Load Cases
Part 2: Geometry Modification
.
|
|
Lesson 12: Thermal Stress Analysis
|
Objectives
Thermal Stress Analysis
Case Study: Bimetallic Strip
Examining Results in Local Coordinate Systems
Saving Model in its Deformed Shape
|
|
Lesson 13: Adaptive Meshing
|
Objectives
Adaptive Meshing
Case Study: Support Bracket
h-Adaptivity Study
p-Adaptivity Study
h vs. p Elements - Summary
|
|
Lesson 14: Large Displacement Analysis
|
Objectives
Small vs. Large Displacement Analysis
Case Study: Clamp
Part 1: Small Displacement Linear Analysis
Part 2: Large Displacement Nonlinear Analysis
|
|
Appendix: Meshing, Solvers, and Tips & Tricks
|
Meshing Strategies
Geometry Preparation
Mesh Quality
Mesh Controls
Meshing Stages
Failure Diagnostics
Tips for Using Shell Elements
Hardware Considerations in Meshing
Solvers in SolidWorks Simulation
Choosing a Solver
|
|
